Skip to content

RPUW - Marinduque Airport

Fetching METAR...

General

Marinduque Airport (RPUW) is a Principal Class 2 airport in Gasan, Marinduque. It has a single runway (16/34) and serves domestic flights and general aviation.

The airport reference point (ARP) is 132140N 1214932E, aerodrome elevation 27 FT.

The runway slopes slightly up towards the threshold of runway 34.

Airspace

  • Marinduque is an uncontrolled aerodrome with no published advisory zone. On the network, Marinduque Radio (RPUW_R_TWR) may provide flight information service on 122.000 when online; otherwise operate on UNICOM (122.800) and self-announce.
  • There is no control zone, terminal area, or radar service.
  • Transition altitude: not published.

Charts

Frequency List

Designator Callsign Frequency Remarks
RPUW_R_TWRMarinduque Radio122.000FSS, flight information
Unicom—122.800When Marinduque Radio is offline

Runways

Marinduque has 1 runway (16/34), 1534 x 30 M, asphalt, strength 23 000 KG.

Below is a table of the declared distances.

Declared Distances (metres).

Runway TORA (m) TODA (m) ASDA (m) LDA (m)
161534153415341534
341534153415341534

Operations

Flight Service Station

Marinduque Radio is a Flight Service Station (FSS). It provides traffic and flight information advisories only and cannot issue ATC clearances. Pilots remain responsible for their own separation and self-announce their intentions.

Marinduque operates VFR. On first contact with Marinduque Radio (or on UNICOM when it is offline), give your position, aircraft type and intentions, and listen out for other traffic.

Who to monitor

Monitor the advisory frequency — Marinduque Radio on 122.000 (or UNICOM 122.800 when it is offline). When no local controller is online, you are also advised to monitor Manila Control (CTR) when one is online for traffic information.

Warning

With a single runway and no radar service, maintain a good lookout and self-announce on each leg of the circuit. Never enter or backtrack the runway until it is confirmed clear. Read back any hold short instruction with "HOLDING SHORT".